Traxxas Power System BL-2S Brushless

El control de velocidad BL-2s™ resistente al agua ofrece todos los beneficios de la tecnología sin escobillas con las características de seguridad y conveniencia que espera de Traxxas. La detección de bajo voltaje incorporada, la protección de apagado térmico y la programación con un solo botón EZ-Set® hacen que los BL-2 sean confiables y fáciles de operar.

Totalmente impermeable
Detección de bajo voltaje de dos etapas incorporada para baterías de polímero de litio (LiPo)
Paquetes de baterías NiMH de 6 a 7 celdas (7,2 - 8,4 V) o paquetes de baterías LiPo de 2 celdas (7,4 V)
El Training Mode™ patentado reduce la potencia de salida en un 50% para conductores nuevos o más jóvenes. Cuando estén listos, simplemente cambie los perfiles para desatar la acción a toda velocidad.
La configuración con un solo botón EZ-Set® funciona y se programa igual que otros controles de velocidad Traxxas

Tres perfiles de unidad programables:
Modo deportivo: avance/freno/retroceso
Modo carrera: avance/freno
Training Mode™: 50 % hacia delante/freno/50 % hacia atrás

LED de estado multicolor
La protección de apagado térmico de dos etapas protege los BL-2 del sobrecalentamiento
El disipador de calor de aluminio grande disipa el calor
Salida de ventilador auxiliar incorporada
Conector de motor con llave

BL-2s WATERPROOF ESC SPECIFICATIONS
Input Voltage:     NiMH 6-7 cells (7.2 to 8.4 volts);
LiPo 2 cell (7.4 volts)
Case Size: 39 mm W x 59 mm D x 31 mm H
Weight: 87 grams
Reverse Delay:     Yes, with lockout
BEC Voltage:      6.0 volts
BEC Current:      3 amps
Input Wire:      14 gauge
Motor Connectors:      Quick Connect Motor Plug
Input Harness Wire:      26 gauge
Low Voltage Detection:     2-stage indicators, switchable (on or off)
Thermal Protection:     2-Stage thermal shutdown
Profile selection:
Sport Mode:  100% Fwd, 100% Brake, 100% Rev
Race Mode: 100% Fwd, 100% Brake, No Rev
Training Mode:*  50% Fwd, 100% Brake, 50% Rev
Single-Button Setup:     Traxxas EZ-Set®
Battery Input Connector: Traxxas High-Current Connector
Motor Types:     Brushless
Accessory Port: Auxiliary fan

BL-2s^™ Brushless Power System
Fast, Affordable, Fun!

The BL-2s^™ brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers experience smooth, effortless power with added punch for tire-shredding burnouts and blazing fast speed. Optimized for 7-cell NiMH and 2s LiPo batteries, the BL-2s delivers all-day fun, battery after battery.

BL-2s Brushless Electronic Speed Control

The waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in low-voltage detection, thermal shutdown protection, and EZ-Set^® one button programming make BL-2s reliable and easy to operate.

BL-2s ESC Features:

­

Fully waterproof Built-in two-stage low voltage detection for lithium polymer (LiPo) batteries NiMH battery packs 6-7 cells (7.2 - 8.4 V) or 2-cell LiPo battery packs (7.4 V) Patented Training Mode™ reduces the power output by 50% for new or younger drivers. When they're ready, simply change profiles to unleash full-throttle action. EZ-Set® one-button setup operates and programs just like other Traxxas speed controls Three programmable drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode™– 50% Fwd / Brake / 50% Rev Multi-color status LED Two-stage thermal shutdown protection protects the BL-2s from overheating Large aluminum heatsink dissipates heat Built-in auxiliary fan output Keyed motor connector

­

­

BL-2s Brushless Motor

The sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high price tag. With no brushes to wear out, the BL-2s is long-lasting and virtually maintenance free. Low-friction ball bearings and an integrated cooling fan open the door to all-day fun.

BL-2s Brushless Motor Features::

­

Integrated cooling fan Low-maintenance design High-speed ball bearings 3300 kV

­

­

 

Integrated Cooling Fan
With no brushes to wear out, the BL-2s brushless motor delivers long-term fun with very low maintenance. An integrated fan pulls cooling air through the motor for all-day running without slowing down.

 

 

 

Quick Connect Motor Plug
The Traxxas Quick Connect Motor Plug delivers free-flowing power from the ESC to the motor. The specially-keyed design aligns the plug in the correct orientation every time.

BL-2s WATERPROOF ESC SPECIFICATIONS

Input Voltage:   NiMH 6-7 cells (7.2 to 8.4 volts); LiPo 2 cell (7.4 volts) Case Size:   39 mm W x 59 mm D x 31 mm H Weight:   87 grams Reverse Delay:   Yes, with lockout BEC Voltage:   6.0 volts BEC Current:   3 amps Input Wire:   16 gauge Motor Connectors:   Quick Connect Motor Plug Input Harness Wire:   26 gauge Low Voltage Detection:   2-stage indicators, switchable (on or off) Thermal Protection:   2-Stage thermal shutdown Profile selection:   Sport Mode:     100% Fwd, 100% Brake, 100% Rev Race Mode:     100% Fwd, 100% Brake, No Rev Training Mode:*     50% Fwd, 100% Brake, 50% Rev Single-Button Setup:   Traxxas EZ-Set® Battery Input Connector :   Traxxas High-Current Connector Motor Types:   Brushless Accessory Port:   Auxiliary fan     *Patented

 

BL-2s BRUSHLESS MOTOR SPECIFICATIONS

Type:   Sensorless brushless kV:   3300 kV Wire Size:   16 gauge Cooling:   Integrated cooling fan Motor Length:   57 mm Can Diameter:   37 mm Weight:   201 grams

 

 

Accessory Cooling fan (3340)
(accessory item, sold separately)

The 3340 accessory cooling fan (sold separately) reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the BL-2s heatsink for easy installation. Wires are neatly routed through the integrated connector clip. Simply plug the accessory cooling fan into the BL-2s accessory power connector and clip the fan onto the heatsink for increased cooling.