CATÁLOGOCategorías

Productos en oferta

Productos en oferta
Todas los productos en oferta
  • Nuevo

LESU RD-A0004 1/16 hydraulic AOUE AT60H articulated truck model Tamiya

5.725,99 €
Impuestos incluidos

Financia tu compra

cuotas
268,00 € / mes en 6 cuotas

VOLQUETE ARTICULADO HIDRAULICO LESU RD-A0004 1/16  AOUE AT60H

PRODUCTO EXCLUSIVO MODELSPAIN, CONSULTAR CONDICIONES DE VENTA.

Cantidad
DISPONIBLE BAJO PEDIDO, CONSULTAR CONDICIONES Y DISPONIBILIDAD

 

Política de seguridad

 

Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)

 

Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)

No tenemos este modelo en stock. Estaremos encantados de encargarle el modelo. El plazo de entrega es de aproximadamente 4 a 6 semanas.
Si esta interesado, por favor contáctenos.


Kit de Lesu Model Racing para volquete articulado en escala 1:16.
Fabricado en acero inoxidable, latón, aluminio y plástico.
El kit contiene todos los componentes necesarios para el montaje y el funcionamiento, excepto el mando a distancia y la batería.
Chasis y superestructuras mecanizados con CNC, pulidos con chorro de arena.
Accionamiento 6x6 con bloqueos diferenciales conmutables.
Transmisión manual de 2 velocidades.
Cilindro de elevación hidráulico, ángulo de inclinación de 55 °.
Dirección hidráulica, cada 40 ° a izquierda y derecha.
Set de iluminación con 20 LED

Longitud: 665 mm
Ancho: 201 mm
Altura: 221 mm
Peso: aproximadamente 12,6 kg

Atención, es un kit. Las imágenes muestran modelos parcialmente ensamblados y pintados.
¡No apto para principiantes!

Se requiere lo siguiente para la operación:
Mando a distancia con transmisor y receptor (al menos 6 canales)
Batería de accionamiento, recomendada 2S / 3S según las dimensiones del compartimento de la batería

¡Advertencia, no es un juguete! ¡No para niños menores de 14 años!

AOUE hydraulic 1/16 AT60H articulated truck. Full metal CNC shell.
Size: L*W*H (MM) 665 X 201 X 221

Net weight: 12.6KG



The car uses a 1:14 planetary two-speed high torque gearbox, 6X6 full-drive wheel-side reduction axle with differential lock. The powerful torque allows the winch to walk on the muddy road like a flat ground.

The steering adopts hydraulic steering. The steering angle is ±40 degrees. Strong steering angle without losing flexibility. The control experience of human and vehicle integration. Even a novice can drive the feeling of an old driver.

The hydraulic lifting and lowering body has a lifting angle of 55 degrees. With steering and body safety lock pins.

The car shell adopts all-metal CNC processing technology. The lines are streamlined, nice. Full metal chassis. The whole car is sandblasted, which is convenient for players to paint.

The front suspension adopts independent suspension with stabilizer bar. The rear suspension adopts Straddle mounted bogie beam. Independent wheel movement via a 3-point mounting system. (Straddle mounted bogie beam. Independent wheel movement via a three-point mounting system). The powerful suspension greatly increases the working range of the clamp. Off-road capability.

Electronic equipment: ESC adopts Hobbywing 1060 brushless ESC and Hobbywing Skywalker 50a brushless ESC. Equipped with light set. 20 LED lights (spotlights, lighting lights, width indicator lights, etc.). Equipped with steering gear and motor. Players only need to equip the remote control and battery to play.

The integrated hydraulic system is easy to disassemble and install. The hydraulic oil pump adopts a new 4 MPa high pressure oil pump. 2-channel directional valve. Hydraulic radiator. The whole car adopts copper tube layout. The details are full. The hydraulic oil is recommended to use No. 46 hydraulic oil. Add 120ml of hydraulic oil. 1. Connect the two-channel reversing valve steering gear control line and the hydraulic pump ESC control line, unscrew the oil tank cap, and pre-fill 60ml hydraulic oil.
2. Turn on the hydraulic pump motor and pay attention to the direction of rotation of the hydraulic pump motor.
3. Control the rotation of the steering gear of the reversing valve, and control the hydraulic cylinders of the whole vehicle to reciprocate for multiple maximum stroke actions, and at the same time, add about 30ml of hydraulic oil at intervals.

4. After the hydraulic cylinder performs smoothly, the emptying operation of the hydraulic system is completed, and the fuel tank cap is tightened. (That is to operate the hydraulic pressure while adding oil. The added hydraulic oil is about 120ml).


Gearbox: 1:14 planetary second gear high torque gearbox

Axle: 6X6 full-drive wheel-side reduction axle with differential lock

Suspension: The front wheel suspension adopts independent suspension with stabilizer bar. The rear suspension adopts Straddle mounted bogie beam. Independent wheel movement via a 3-point mounting system.

Electronic equipment: ESC adopts Hobbywing 1060 brushless ESC and Hobbywing Skywalker 50a brushless ESC. Equipped with light set. 20 LED lights (spotlights, lighting lights, width indicator lights, etc.). Equipped with steering gear and motor.

RD-A0004

No customer reviews for the moment.