CATÁLOGOCategorías
RC4WD 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (Yellow and White)
  • RC4WD 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (Yellow and White)

RC4WD 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (Yellow and White)

5.321,95 €
Impuestos incluidos

RC4WD 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (Yellow and White)

Cantidad
Disponible bajo pedido, consultar disponibilidad.

Accesorios recomendados

1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (White)
The Earth Mover 870K is the most powerful wheel loader available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 350kV brushless system.

This product is hand assembled. The vendor makes every effort to assemble with no imperfections, but due to the nature of this product and the amount of effort and work that goes into each one, it could have a few small blemishes.

Notice: This product is for experienced RC hobbyists. This is not recommended for anyone under the age of 16. 


https://www.rc4wdteam.com/Marketing/Banners/LightKitNowAvailable012819.gif

Specifications:
  • CNC Machined Metal parts
  • Molded Steel bucket
  • 6 channel 2.4Ghz radio
  • Optimized Steel Hydraulic system
  • Scale operator station (can fit a driving figure)
  • Massive 29.5-25L-5 Tires
  • Reliable hydraulic valve and adjustable pump
  • Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
  • Powder coated in yellow
  • Brushless system (hydraulic)
  • 40A brushless ESC with BEC
  • Kv brushless monster torque Motor
  • Realistic non functional disk break
  • Scale ABS plastic interior
  • Wheel with planetary gearbox build-in
  • 2 speed full metal transmission (1:16 and 1:4 gear ratio)
  • Realistic full metal Axles
  • Run time is: 30 minutes (6500mAh Battery)
  • Steel Machined oil pump (45mm X 30mm X 15.5mm)
  • Maximum bucket force: 70kg / 154pounds
  • Lipo Cutoff
  • Scale: 1:14
  • Length: 741mm / 29inch
  • Width: 276mm / 11inch
  • Height: 276mm / 11inch
  • Maximum bucket Height: 461mm / 18inch
  • Maximum bucket up and down angle: 46 to 64 degrees
  • Maximum bucket left and right angle: 38 degrees
  • Wheel base: 284mm
  • Dead Weight: 20.5kg / 45lbs
  • Total mass load: 32kg / 70lbs
  • Operating oil pressure: 20Bar, 290psi
Courtesy photo provided by RC Sparks
What's Included:
  • 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (White)
Required Parts:
Replacement Parts:
Optional Parts:
Optional Colors:
Lighting System:
Sounds System:
  • Not Included
Instruction Manual:
Radio Instruction Manual:

Notes:
  • While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
  • ESC Supports bullet Connector
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require thread lock.
  • Use thread lock sparingly.
  • Do not over tighten screws otherwise you may strip the thread.
  • Battery Size should be within 140x45x25MM (LxWxH)
  • Manufactured by JDCustoms 30 Days Limited Warranty
Warranty Information
This product is made for heavy duty usage. Since there are no plastic parts, it's designed to last. But hydraulic pumps, hoses and electronics systems can break over time. Do not let the system overheat during usage. We will have all spare parts available for sale. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is fully tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.
This Wheel Loader is shipped without oil. You will have to fill the tank yourself (half tank), by using a funnel or tube (not included).



RC4VVJD00031