RC4WD 1/12 Scale Earth Digger 4200XL Hydraulic Excavator (RTR) (Version 2.0)
RC4WD 1/12 Scale Earth Digger 4200XL Hydraulic Excavator (RTR) (Version 2.0)
Specifications:
- Custom 8 Channel 2.4Ghz radio
- High Intensity Light (Super bright) (3 Watt)
- Optimized Steel Hydraulic system
- Scale operator station (can fit a driving figure and seat)
- Steel Molded Tracks (50mm Width, 45 grade carbon Steel)
- Efficient under carriage with Tracks
- Reliable Hydraulic valve and Adjustable Pump
- Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
- Bearing based undercarriage design
- Undercarriage rotate 360 degrees (Endless)
- Powder coated in yellow
- Massive brushless system (Hydraulic)
- 60A brushless ESC with BEC
- 350KV brushless monster torque motor (4130 OutRunner, 6mm Shaft)
- Neodymium magnets
- Belt/track is controlled individually
- XT60 Power Plug Female
- Lipo Cutoff
- Run time is: 40-50 minutes (6500mAh battery)
- Steel Machined Oil Pump (45mm X 30mm X 15.5mm)
- Digging force: 15kg / 33pounds
- Driving Speed: 310 Meter per hour
- Scale: 1:12
- Dig Depth: 495mm / 19.4inch
- Height of Cabin: 155mm / 6.1inch
- Length: 1.15meter / 45inch
- Width: 250mm / 9.8inch
- Height: 840mm / 33inch
- Dead Weight: 20kg / 44lbs
- Operating Oil Pressure: 20Bar, 290psi
- Inside Cab Length: 4.72in / 120mm
- Inside Cab Width: 2.55in / 65mm
- Inside Cab Height: 5.31in / 135mm
Customer's ride pictures:
Image provided by RC Sparks using Earth Digger 4200xl.
What's Included:
- 1/12 JDCustoms Earth Digger 4200XL Hydraulic Excavator (RTR) (Version 2.0)
Replacement Parts:
- Earth Digger 4200XL Oil Pump (VVV-S0005)
- Earth Digger 4200XL High Voltage Brushless ESC (VVV-S0009)
- Earth Digger 4200XL Excavator Brushless Motor (VVV-S0010)
- Earth Digger 4200XL Excavator Brushed ESC (VVV-S0011)
- Earth Digger 4200XL Moving GearBox Motor (17 RPM) (VVV-S0012)
- Earth Digger 4200XL Turning GearBox Motor (27 RPM) (VVV-S0013)
- Pressure Relief Valve for Earth Digger (VVV-S0041)
- Earth Digger 4200XL Excavator Aluminum Track (V2) (VVV-S0123)
- Hydraulic Connector M5 x 4mm Tube (90deg) (VVV-S0069)
Required Parts:
- Supply Voltage: 12V, XT60 Connector, We recommend=3S, 25C LiPo Battery.
- Compatible Battery Charger
- 8x AA Batteries for Radio (Z-S1718)
- Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)
Optional Parts:
Note: During operation, HID light might flash due to power drain.
Notes:
- Battery Size should be within 160x51x73MM(LxWxH).
- While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
- ESC Supports XT60 Connector
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
- Manufactured by JDCustoms 30 Days Limited Warranty
Warranty information
This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.
This Excavator is shipped without oil. You will have to fill the tank your self (half tank), by using a funnel or tube (not included).
Gathering in Norway:
Strength Test Video by Martin Hough "Click Here"
Digging Test Video by Martin Hough "Click Here"
Awesome Video by RC Sparks "Click Here"
Video Tutorial:
- Click Here to See More
Breakdown of the Excavator by RC Sparks