You need to hold the truck firmly and take it out of the box horizontally to prevent the front compartment from rotating and damaging the whole truck.
Using 2S, half speed at 6.5V and shut off at 6V. Using 3S, half speed at 9.75V and shut off at 9V. Do not use more than 3S battery. (11.1 volt(s))
Once the hydraulic cylinder (dump) reaches its maximum height, do not push further.
Must turn on the transmitter before starting the ESC.
ESC Supports XT60 Connector
While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
Use threadlock sparingly.
Do not over tighten screws, otherwise, you may strip the thread.
This product is for experienced R/C users. Not recommended if you just started with R/C.
Please refer to the product manual for oil filling method.
Manufactured by JDCustoms 30 Days Limited Warranty