Catálogo

Marcas

TRAXXAS TRX-4 CRAWLER ASSEMBLY KIT 2.4GHz Requires: Body, Battery and Charger Ampliar

TRAXXAS TRX-4 CRAWLER ASSEMBLY KIT 2.4GHz Requires: Body, Battery and Charger

Traxxas TRX-4 KIT Crawler TQi, XL-5, NUEVO MODELO EN KIT PARA MONTAR

Nuevo modelo 2018, BATERIA, CARGADOR Y CARROCERIA NO INCLUIDOS

Más detalles

TRX82016-4

Disponibilidad: Pendiente de recibir, consultar disponibilidad.

369,99 €

¡Precio rebajado!

-90,00 €

459,99 €

Fabricante
TRAXXAS

By buying this product you can collect up to 18 loyalty points. Your cart will total 18 points that can be converted into a voucher of 3,60 €.


Los clientes que compraron este producto también han comprado...

MATERIAL INCLUIDO EN EL KIT

Unassembled TRX-4 Chassis Kit
TQi™ 2.4GHz 4-channel radio system with 4 servos
XL-5 HV waterproof ESC
Titan® 21T 550 motor
Full-color step-by-step assembly manual


MATERIAL NECESARIO NO INCLUIDO ( VER PESTAÑA DE ACCESORIOS)
­
TRX-4 compatible body (312mm)
4 AA alkaline batteries
Battery with Traxxas High-Current Connector
6 or 7 cell NiMH battery pack
2s or 3s LiPo battery pack
Battery charger
Metric hex drivers  1.5mm, 2.0mm, 2.5mm
Basic hand tools         screwdrivers, needle nose pliers
Traxxas Ultra-Premium Tire Glue (part #6468) or CA glue
Safety glasses

CARACTERISTICAS GENERALES.
    Easy to follow full-color assembly manual
        True-to-scale part illustrations and ruler charts
        Helpful assembly tips and clear illustrations
    Trail-tuned XL-5 HV Waterproof Electronic Speed Control
        Fully waterproof design
        Five drive profiles
            Sport Mode — forward / brake / reverse
            Race Mode — forward / brake / no reverse
            Training Mode™ — 50% forward / 100% brake / 50% reverse (patented)
            Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
            Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
        Traxxas EZ-Set® one-button setup
        Large, efficient heat sink
        Wide voltage latitude 6–7 cell NiMH (7.2–8.4V) and 2–3S LiPo (7.4–11.1V)
        Two stage low voltage protection (LVD)
    Powerful Titan™ 21T reverse rotation motor
        Internal cooling fan
        Precise, preset gear mesh adjustments
        Motor retention separate from gear mesh
    Portal Axles
        Increase ground clearance (3.14”)
        Eliminate torque twist
        Steel gears
        Improve axle geometry and reduce strain on driveshafts
    Rigid Steel Frame
        1.5mm thick steel frame rails increase torsional rigidity
        Innovative design allows four wheelbase positions (300mm, 312mm, 324mm, 336mm)
        Adjustable rear shock tower positions
        Bumpers adjust fore and aft
        Rugged rock rails adjust for width
        Wire routing clips integrated into frame rails
    Drivetrain
        Full-time shaft driven 4-wheel drive
        Tough 6mm stub axles
        Steel front CV driveshafts
        Hardened steel rear axle shafts
        Remote locking steel gear differentials with cable-actuation
        Steel gear transfer case
    Innovative Battery Compartments
        Hinged battery strap allows quick and easy battery access
        No pins to lose
        Accommodates different height batteries
        Accepts full-size long battery packs
        Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
        Secondary battery mount over front axle for forward weight bias
    Two speed high/low range transmission with remote shifting
        Dual horizontal shafts
        Twin friction plate slipper clutch
        Easily removed for servicing
    Steering
        Chassis mounted 2075X metal gear digital servo
        Superior 45° steering angle
        Direct steering (no servo saver)
        Steering geometry corrected for bump steer
    Suspension
        Front — 3 link with panhard
        Rear — Triangulated 4 link
        Pre-assembled heavy-duty rod ends with steel hollow balls
        5mm diameter steel link rods with 4mm threaded ends
    Pre-assembled aluminum GTS Shocks
        Coilover GTS shocks exclusive to TRX-4 chassis
        Silver-anodized aluminum bodies
        Threaded bodies with collars easily adjust ride height
        Silky smooth damping for the toughest trails
        O-ring cap seal and dual X-ring shaft seals
        Shock oil included in kit
    Wheels and Tires
        1.9” Canyon Trail tires with trail-tuned foam inserts
        Tough black scale wheels
        Trail tuned S1 rubber compound
        12mm steel hex
        Tire glue required
    TQi™ 2.4GHz 4-channel transmitter
        Traxxas Link enabled
        Telemetry ready #6533 5-channel micro receiver with failsafe
        Automatically stores and loads settings for up to 30 Traxxas Link enabled models
        Exclusive Cruise Control feature for extended trail driving
        Adjustable steering and throttle sensitivity (exponential)
        Adjustable steering and throttle endpoints
        High 13ms frame rate and near-zero latency for responsive control
    Patented O-Ring sealed watertight receiver box keeps the micro receiver dry
    Sealed Ball Bearings
    Hex hardware with rust-resistant black oxide coating

TRX-4 CHASSIS KIT (#82016-4) SPECS

Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Approach Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Wheel Hex: 12mm
Speed Control: XL-5™ HV
Motor (electric): Titan® 21T Reverse Rotation
Differential Type: 4 Gear, Remote Locking
Transmission: 2-speed Hi-Lo, Remote Shifting
Gear Pitch: 32
Chassis 
Structure/Material:
 Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic “Hill Hold”
Drive System: Shaft-Driven 4WD
Steering: Chassis Mounted 2075X Metal Gear Servo
Radio System: TQi™ 2.4 GHz 4-Channel Transmitter with #6533 Receiver
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H

+INFO

https://traxxas.com/products/models/electric/trx-4-kit?t=overview

No hay comentarios de clientes por ahora.

Escribe tu opinión

TRAXXAS TRX-4 CRAWLER ASSEMBLY KIT 2.4GHz Requires: Body, Battery and Charger

TRAXXAS TRX-4 CRAWLER ASSEMBLY KIT 2.4GHz Requires: Body, Battery and Charger

Traxxas TRX-4 KIT Crawler TQi, XL-5, NUEVO MODELO EN KIT PARA MONTAR

Nuevo modelo 2018, BATERIA, CARGADOR Y CARROCERIA NO INCLUIDOS

Escribe tu opinión